Page 1 of 1

Low volume in SLI

Posted: 20 Sep 2017 07:30
by espinosa
I have 2 OXE R11.0.1, each with 1 IPMG. In the MGs, all the SLI extensions have low volume in conversation.

┬┐There is a way to increase this volume?

TIA

Re: Low volume in SLI

Posted: 20 Sep 2017 16:45
by frank
Go to mgr > system > descend hierarchy > Z audio parameter

Rec.Gain for QDSP: 108
Rec.Send Gain for QDSP: 160
Send Gain for QDSP: 51

Adjust these values as per requirement and check the output of the audio.

The board needs to be rebooted.
Make note of the values you change, so you can revert in case you need to.

Re: Low volume in SLI

Posted: 04 Oct 2017 07:39
by espinosa
Thanks, I'll try and comment.