DUAL CPU8 not show Local Main name in Main active CPU ! - Alcatel Unleashed
i connect to main role ip address (192.168.1.4). the CPU name show here should be cpu_m
doublevand981 wrote: ↑04 Nov 2019 01:46i connect to main role ip address (192.168.1.4). the CPU name show here should be cpu_m
haroun wrote: ↑05 Nov 2019 03:10 yep it shows Always the local name
(1)pst_cpu20>
Ethernet interface setup
========================
Netmask : 255.255.255.192
==============================================================================
| Machine type | Local interface | Name | Address |
==============================================================================
| local | Ethernet | pst_cpu20 | 10.235.96.131 |
| local main | Ethernet | main | 10.235.96.130 |
| local | IP/X25 tunnel | x000001_tun | 172.30.253.1 |
CPU redundancy setup
====================
Netmask : 255.255.255.192
==============================================================================
| Machine type | Local interface | Name | Address |
==============================================================================
| local | Ethernet | pst_cpu6 | 10.235.96.129 |
| local main | Ethernet | main | 10.235.96.130 |
==============================================================================
each time the local name is used instead of "main" wich is the norma behavour cuse like this we know wich cpu is the maindoublevand981 wrote: ↑05 Nov 2019 23:36haroun wrote: ↑05 Nov 2019 03:10 yep it shows Always the local name
(1)pst_cpu20>
Ethernet interface setup
========================
Netmask : 255.255.255.192
==============================================================================
| Machine type | Local interface | Name | Address |
==============================================================================
| local | Ethernet | pst_cpu20 | 10.235.96.131 |
| local main | Ethernet | main | 10.235.96.130 |
| local | IP/X25 tunnel | x000001_tun | 172.30.253.1 |
CPU redundancy setup
====================
Netmask : 255.255.255.192
==============================================================================
| Machine type | Local interface | Name | Address |
==============================================================================
| local | Ethernet | pst_cpu6 | 10.235.96.129 |
| local main | Ethernet | main | 10.235.96.130 |
==============================================================================
Did you check the Dual status ?
Telnet to 10.235.96.130 ip address. it should show name "main"