Page 1 of 1
OXE CPU switch-over
Posted: 11 Jul 2018 11:00
by gilcsr
Hello
just a question...
is it normal that during a cpu switch-over (bascul main xa to xb) all the DECT communications are lost ?
only the IP or Analogic communications are maintained
the redundancy is ok
sorry for my english...
thanks for your answers
oxe R10.1.1-j2.603-29-b-fr-c0
Re: OXE CPU switch-over
Posted: 16 Jul 2018 08:49
by mustafa.ahmad
No, it is not normal, all the communications must be as they are, only the calls that are being placed or in routing mode get disconnected. Calls already established must remain as in their state before bascul.
Maybe there is bug in the patch.
Re: OXE CPU switch-over
Posted: 16 Jul 2018 23:19
by vad
I think - your DECT sinchronized from CPU. And in this case during switch-over - DECT network reinitalized and all communication lost (the same problem can be with ABC-F calls)
Re: OXE CPU switch-over
Posted: 25 Jul 2018 04:39
by gilcsr
hi
thanks for your answers
so, my ibs or DECT can be synchronized whith only one CPU and that's why it can't be in redondancy ?
nothing to do?
Re: OXE CPU switch-over
Posted: 16 Oct 2018 12:15
by Eliott
You need two DECT8_SYNC boards to have a seamless clock.
Re: OXE CPU switch-over
Posted: 16 Oct 2018 12:16
by Eliott
What are the components?
Can you post a config all and infocs?