4XX8EE Phones with Asterisk

carlocarlo
Member
Posts: 12
Joined: 08 Oct 2018 08:43

Re: 4XX8EE Phones with Asterisk

Post by carlocarlo » 15 Oct 2018 11:31

sorry, I did not understand what am I wrong?
all of my sip phone are configured by provisioning tftp(option 66) server, why the alcatel not do this?

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7007
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: 4XX8EE Phones with Asterisk

Post by cavagnaro » 15 Oct 2018 11:39

There are specific codes like Alcatel vendor ID to be included.
Please read basic DHCP server doc and later you can test

Enviado de meu E6633 usando o Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

carlocarlo
Member
Posts: 12
Joined: 08 Oct 2018 08:43

Re: 4XX8EE Phones with Asterisk

Post by carlocarlo » 15 Oct 2018 12:37

Hi,
i search on forum and follow this guide:
8AL90824AAAAed01-IPTouchSIPphonesinstallation.pdf
Now, telnet mode command "dwl" show the mode SIP.
When the phone boot search the configuration, see in tcpdump:

192.168.199.205.blackjack > 192.168.199.xxx.https: Flags [F.], cksum 0xe580 (correct), seq 861, ack 1567, win 17376, options [nop,nop,TS val 3613 ecr 3197506319], length 0
IP (tos 0x0, ttl 64, id 5484, offset 0, flags [DF], proto TCP (6), length 52)
192.168.199.xxx.https > 192.168.199.205.blackjack: Flags [.], cksum 0x28d9 (correct), seq 1567, ack 862, win 130, options [nop,nop,TS val 3197506326 ecr 3612], length 0
ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.199.xxx tell 192.168.199.205, length 46
ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.199.xxx is-at 00:50:56:a2:2f:fb, length 28
IP (tos 0x0, ttl 64, id 19, offset 0, flags [none], proto UDP (17), length 73)
192.168.199.205.1024 > 192.168.199.xxx.domain: [udp sum ok] 1+ A? {{ NTP_SERVER }}.xx.xx.xx. (45)
IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 125)
192.168.199.xxx.domain > 192.168.199.205.1024: [bad udp cksum 73af!] 1 NXDomain q: A? {{ NTP_SERVER }}.xx.xx.xx. 0/1/0 ns: xx.xx.xx. [49m26s] SOA dns1.xx.xx.xx. postmaster.xx.xx.xx. 2018101501 10800 3600 604800 3600 (97)
IP (tos 0x0, ttl 64, id 20, offset 0, flags [none], proto UDP (17), length 62)
192.168.199.205.blackjack > 192.168.199.xxx.domain: [udp sum ok] 2+ A? {{ NTP_SERVER }}. (34)
IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 137)
192.168.199.xxx.domain > 192.168.199.205.blackjack: [bad udp cksum f31f!] 2 NXDomain q: A? {{ NTP_SERVER }}. 0/1/0 ns: . [2h49m27s] SOA a.root-servers.net. nstld.verisign-grs.com. 2018101600 1800 900 604800 86400 (109)
IP (tos 0x0, ttl 64, id 21, offset 0, flags [none], proto UDP (17), length 73)
192.168.199.205.cap > 192.168.199.xxx.domain: [udp sum ok] 3+ A? {{ NTP_SERVER }}.xx.xx.xx. (45)
IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 125)
192.168.199.xxx.domain > 192.168.199.205.cap: [bad udp cksum 7054!] 3 NXDomain q: A? {{ NTP_SERVER }}.xx.xx.xx. 0/1/0 ns: xx.xx.xxt. [46m41s] SOA dns1.xx.xx.xx. postmaster.xx.xx.xx. 2018101501 10800 3600 604800 3600 (97)
IP (tos 0x0, ttl 64, id 22, offset 0, flags [none], proto UDP (17), length 62)
192.168.199.205.1027 > 192.168.199.xxx.domain: [udp sum ok] 4+ A? {{ NTP_SERVER }}. (34)
IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 137)
192.168.199.xxx.domain > 192.168.199.205.1027: [bad udp cksum f06d!] 4 NXDomain q: A? {{ NTP_SERVER }}. 0/1/0 ns: . [2h43m53s] SOA a.root-servers.net. nstld.verisign-grs.com. 2018101600 1800 900 604800 86400 (109)


but not find my files "sipconfig-00809ff8fa46.txt" and "sipconfig.txt" on tftp. What i wrong?
You do not have the required permissions to view the files attached to this post.

infoso
Member
Posts: 3
Joined: 15 Oct 2018 03:57

Re: 4XX8EE Phones with Asterisk

Post by infoso » 16 Oct 2018 09:11

Hello, I have an Alcatel Lucent 8038.
I can not change the device from NOE to SIP mode. It just does not save the change.
can someone help me? Thx

User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7007
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: 4XX8EE Phones with Asterisk

Post by cavagnaro » 16 Oct 2018 10:04

infoso wrote:Hello, I have an Alcatel Lucent 8038.
I can not change the device from NOE to SIP mode. It just does not save the change.
can someone help me? Thx
Check your firmware version, is not the last one
And doesn't allow it. Or your set type is not supported. Not all 40x8 can go sip, only some editions.

Enviado de meu E6633 usando o Tapatalk

Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer

infoso
Member
Posts: 3
Joined: 15 Oct 2018 03:57

Re: 4XX8EE Phones with Asterisk

Post by infoso » 17 Oct 2018 02:34

cavagnaro wrote:
16 Oct 2018 10:04
infoso wrote:Hello, I have an Alcatel Lucent 8038.
I can not change the device from NOE to SIP mode. It just does not save the change.
can someone help me? Thx
Check your firmware version, is not the last one
And doesn't allow it. Or your set type is not supported. Not all 40x8 can go sip, only some editions.

Enviado de meu E6633 usando o Tapatalk
Hello, the Firmware Version is NOE 4.52.13. Is the firmware SIP Compatibel?

THX

carlocarlo
Member
Posts: 12
Joined: 08 Oct 2018 08:43

Re: 4XX8EE Phones with Asterisk

Post by carlocarlo » 22 Oct 2018 05:32

I managed to manage the phone with an asterisk, the only problem is that it doesn't display the missed calls.
Can anyone help me? in the features of the phone there isn't.

Thank's

Lovert
Member
Posts: 1
Joined: 11 Jan 2019 11:28

Re: 4XX8EE Phones with Asterisk

Post by Lovert » 11 Jan 2019 13:49

hello distinguished gurus;
I have 15 iptouch 4068EE phones and an installed and working asterisk server. I read from this thread that it is possible to make 4008 and 4018 work with the asterisk sip server by obtaining and loading the sipconfig.text file to the tftp server in your network where the phones have to download their configurations at boot time. I have two questions

1) Does the above process still apply to my iptouch 4068EE phones; if yes am i oblige to use the same sipconfig.txt and/or sipconfig-macaddress.txfile sited above??

2) can someone help me with a detailed step by step procedure on how to setup and upload the config files to my tftp server??
Thanks very much in advance

kennyhuang
Member
Posts: 1
Joined: 19 Feb 2019 11:35

Re: 4XX8EE Phones with Asterisk

Post by kennyhuang » 20 Feb 2019 10:49

Hi all,

I'm looking for a compatible version of the noesip8038N binary file for datsip8038N (version 3.00.50).

Thanks in advance.

dmarjolin
Member
Posts: 4
Joined: 23 Jul 2016 11:32

Re: 4XX8EE Phones with Asterisk

Post by dmarjolin » 17 May 2019 13:28

I've just replaced my Alcatel PABX with a SIP one and trying to get my 4018EE, 4028EE & one 4038EE sets to work in SIP mode.
I've put my sipconfig.txt, sipconfig-MACADDR.txt as well as the 4018 & 4028 bin files in the tftp root folder of the PABX and the phones work +/- well. The only things are that:
1. I get a "file not found" after the "Updating Load" step (is the absence of the lanpbx.cfg in the tftproot folder the cause?), and
2. I can't search by extension name on the phones. I can only do so on the local phone directory.
3. The "programmable" keys don't work.
Grateful if someone could assist.

Post Reply

Return to “Asterisk”