We recently changed our network config and switched channels due to external interference on channel 1. We are now using channels 3, 8 and 13. Since the change, our MIPT 8118 doesn't connect to our wireless network anymore.
When going to the admin interface using 40022 and select "Scan all channels" in the "Site survey tool", it doesn't show our networks. It only shows 1 network, our neighbours which is running at channel 6. When I manually scan a single channel (3, 8 and 13), it does show the networks and shows good reception.
Does anyone have an idea on why this is? It would be a strange if the set was limited to just channels 1, 6 and 11.