The format need to be 8khz 16 bit mono but you need to get the naming right.
You will not find the crcvg tool any where i was given it from a French engineer sometime ago but i need to find it!!!!!!!!!!!!
Alcatel Unleashed
The #1 Worldwide board for technical support on Alcatel-Lucent Voice & Data gear.
|
Check out the AlcatelUnleashed mailing lists Use TapaTalk from your iPad/iPhone/Android/Blackberry to browse AlcatelUnleashed with a great experience! |
AlcatelUnleashed recommends GIXEN for eBay Sniping! |
Convert *.wav with crcvg
46 posts
• Page 2 of 5 • 1, 2, 3, 4, 5
by oldboy » Thu May 18, 2006 6:59 pm
What it means by mgr is under Dynamic Voice guides you can import the voice guides from the /usr7/vg/pc directory to the /usr7/vg/dhs directory.
The format need to be 8khz 16 bit mono but you need to get the naming right.
You will not find the crcvg tool any where i was given it from a French engineer sometime ago but i need to find it!!!!!!!!!!!!
The format need to be 8khz 16 bit mono but you need to get the naming right.
You will not find the crcvg tool any where i was given it from a French engineer sometime ago but i need to find it!!!!!!!!!!!!
-
oldboy - Alcatel Unleashed Certified Guru
- Posts: 456
- Joined: Thu Aug 25, 2005 3:24 pm
by cavagnaro » Thu May 18, 2006 7:24 pm
ohhh ok, put that gun down now boy, we understood now. 
Ignorance is not the problem, the problem is the one that doesn't want to learn
OTUC ACFE/ACSE R3.0/4.0/5.0/6.0
Genesys CIV 7.X & Developer
OTUC ACFE/ACSE R3.0/4.0/5.0/6.0
Genesys CIV 7.X & Developer
-
cavagnaro - Alcatel Unleashed Certified Guru
- Posts: 4551
- Joined: Wed Sep 14, 2005 4:45 pm
- Location: Moved to Brasil
by rick63 » Fri May 19, 2006 12:24 pm
Alex wrote:Can you specify in which manual you read about this tool?
In which environment this tool is used - Windows, Chorus, Linux?
Oh, the documentation was in an "4400 advanced" Course of the Alcatel University. I think it was a Rel.4.x on a chorus machine.
My Systems are from Release 3.x - 4.x (chorus) over 5.x Unix and linux until now Rel.6.1/6.2 Linux.
All these systems are 4400 Systems now it calls "OXE" I mean, in common and now also in crystal hardware.
I read aobove, that the "crcvg" is a Chorus-tool. I would need it for a 6.x OXE Linux System.
So it seem, that I must take the Alcatel Audio Station for my work.
Greetings again.
- rick63
- Member
- Posts: 14
- Joined: Wed Mar 29, 2006 2:30 pm
- Location: Germany
by cavagnaro » Mon May 22, 2006 3:10 am
Maybe if it is just a short audio someone of us can convert it for you...
Ignorance is not the problem, the problem is the one that doesn't want to learn
OTUC ACFE/ACSE R3.0/4.0/5.0/6.0
Genesys CIV 7.X & Developer
OTUC ACFE/ACSE R3.0/4.0/5.0/6.0
Genesys CIV 7.X & Developer
-
cavagnaro - Alcatel Unleashed Certified Guru
- Posts: 4551
- Joined: Wed Sep 14, 2005 4:45 pm
- Location: Moved to Brasil
Convert *.wav with crcvg
by sadim » Sun Jul 09, 2006 5:08 pm
I order to forsee if i should invest some time trying to know if it is possible to make a application that can convert a wav file into a ccd file (like crcvg), i would like your feedback on it.
- sadim
- Alcatel Unleashed Certified Guru
- Posts: 319
- Joined: Fri Jun 02, 2006 4:11 am
- Location: Portugal
by krzysioD » Thu Aug 31, 2006 5:11 am
Don't know what you mean by 'ccd' file, but the Voice Guide files are a simple Wav/RIFF/A-low files with calculated 4-byte CRC checksum and some memo "insert your comment here".
Don't know any program to actually convert files (not AAS) but it could be done by two-step:
1) actualy convert (Cooledit, Audacity, sndrec32.exe or Sox[tm] for Linux)
2) calculate crc (it should be some easy to guess procedure, having some VG files w/ crc and only 4 bytes) and add it to .wav file (anykind of MS Visual* compiler and mmioCreateChunk() or Perl and File::Format::RIFF)
Any Coments?
Don't know any program to actually convert files (not AAS) but it could be done by two-step:
1) actualy convert (Cooledit, Audacity, sndrec32.exe or Sox[tm] for Linux)
2) calculate crc (it should be some easy to guess procedure, having some VG files w/ crc and only 4 bytes) and add it to .wav file (anykind of MS Visual* compiler and mmioCreateChunk() or Perl and File::Format::RIFF)
Any Coments?
Please note that at no time I will provide you with OXE/4400 nor AOS releases.
Note that it's our private time, that we spent to help you, so please don't expect complete solution for your problem.
You will need to do homework by your self.
Note that it's our private time, that we spent to help you, so please don't expect complete solution for your problem.
You will need to do homework by your self.
- krzysioD
- Alcatel Unleashed Certified Guru
- Posts: 1112
- Joined: Wed Aug 30, 2006 10:43 am
- Location: Europe, Poland
Convert *.wav with crcvg
by sadim » Thu Aug 31, 2006 6:14 am
In fact all of that is true, but it has do be done!
- sadim
- Alcatel Unleashed Certified Guru
- Posts: 319
- Joined: Fri Jun 02, 2006 4:11 am
- Location: Portugal
46 posts
• Page 2 of 5 • 1, 2, 3, 4, 5
Who is online
Users browsing this forum: No registered users and 1 guest
