sw 6400 stuck in u-boot

Post Reply
cavangboi
Member
Posts: 6
Joined: 03 Jun 2014 21:41

sw 6400 stuck in u-boot

Post by cavangboi » 13 Oct 2017 00:26

Dear all, i have a sw6424 that failed after an upgrade firmware, now how can i recover it miniboot ?
Image at FF900000:
Image Name: miniboot-6.4.3.565.R01
Image Type: PowerPC VxWorks Kernel Image (gzip compressed)
Data Size: 1006719 Bytes = 983.1 kB
Load Address: 00005000
Entry Point: 00005000
Verifying Checksum ... Bad Data CRC
OK
=>
Brgs

Post Reply

Return to “OmniSwitch 6400”