Hello,
I'm not well versed in AL OS... I'm trying to use a layer 2 VLAN in a 6850 but I must have missed something... I've created an interface on my firewall and assigned it to VLAN Tag 10, gave the interface address 172.16.10.254 on a /24 block. I went into the OS6850 and created VLAN 10, and then did vlan 10 802.1q 1/20 "TAG PORT 1/20 VLAN 10"
However, I am unable to ping 172.16.10.254 from the 6850. It simply times out. I have another VLAN on the same port which works without issue... VLAN 50 is created on my firewall with 192.168.50.254/24 and I can ping that from the 6850.
VLANs are tagged as follows :
vlan 10 802.1q 1/20 "TAG PORT 1/20 VLAN 10"
vlan 50 802.1q 1/20 "TAG PORT 1/20 VLAN 50"
vlan 10 802.1q 1/21 "TAG PORT 1/21 VLAN 10"
vlan 50 802.1q 1/21 "TAG PORT 1/21 VLAN 50"
Port 21 connects to a Cisco switch.
10 1/20 qtagged forwarding
10 1/21 qtagged forwarding
50 1/20 qtagged forwarding
50 1/21 qtagged forwarding
I'm sure I'm missing a step?
Thanks.