OmniSwitch 6000 + TimeTicks

Post Reply
hinesh

OmniSwitch 6000 + TimeTicks

Post by hinesh »

I have a switch with the following system.

Welcome to the Alcatel-Lucent OmniSwitch 6000
Software Version 6.3.4.443.R01 Service Release, July 20, 2009

Copyright(c), 1994-2009 Alcatel-Lucent. All Rights reserved.

OmniSwitch(TM) is a trademark of Alcatel-Lucent registered
in the United States Patent and Trademark Office.

System:
Description: 6.3.4.443.R01 Service Release, July 20, 2009.
Object ID: 1.3.6.1.4.1.6486.800.1.1.2.1.7.1.6,
Up Time: 267 days 0 hours 53 minutes and 21 seconds,
Services: 72,
Date & Time: MON JUN 06 2011 15:01:26 (GMT)

Flash Space:
Primary CMM:
Available (bytes): 6593024,
Comments : None

Show chassis

Chassis 1
Model Name: OS6850-P48,
Description: 48 G POE,
Part Number: 902463-40,
Hardware Revision: 06,
Serial Number: G4751744,
Manufacture Date: DEC 01 2006,
Admin Status: POWER ON,
Operational Status: UP,
Number of Resets: 50


And against this switch I have run an SNMP query to interrogate the IF-MIB::ifLastChange for interface 42 and below is the output.

IF-MIB::ifLastChange.1042 = Timeticks: (2304794900) 266 days, 18:12:29.00

To convert the Timeticks (2304794900), I have used the following site

http://www.epochconverter.com/#

and converting Timeticks: (2304794900) =

GMT: Tue, 13 Jan 2043 20:48:20 UTC
Your timezone: 13 January 2043 20:48:20

Now my question is how can be. How can the Timeticks for this port reflect a futuristic date?

Naturally some where there is a bug and I do not believe the bug is with the Timeticks conversion process as I have verified the conversion process on a 2nd web site (http://www.onlineconversion.com/unix_time.htm)
and get the same output.

Timeticks: (2304794900) = Tue, 13 Jan 2043 20:48:20 UTC

So does any one have any idea where or what is causing this bug?
one6f

Re: OmniSwitch 6000 + TimeTicks

Post by one6f »

Hi hinesh,
And against this switch I have run an SNMP query to interrogate the IF-MIB::ifLastChange for interface 42 and below is the output.

IF-MIB::ifLastChange.1042 = Timeticks: (2304794900) 266 days, 18:12:29.00
This means that port 1/42 has changed its status after 266 days, 18:12:29 after the OmniSwitch was turned on.
Up Time: 267 days 0 hours 53 minutes and 21 seconds,
An 267 days 0 hours 53 minutes and 21 seconds ago your switch has been rebooted.
And after that, 266 days, 18:12:29 later, changed the port status to UP.

You don't need to convert Timestick value to human date, it shows difference between the start time of switch and change state of port.
Post Reply

Return to “OmniSwitch 6850 / 6850E”