outgoing call number identification

outgoing call number identification

Postby kamel » Tue Aug 21, 2007 3:53 am

Alcatel 4400

some phonesets have number identicfication active when calling outside and some not - where to set it?
additionaly this works only when going outside with prefix *78, with 0 it does not work - where to configure that?

thanks in advance,
kamel
kamel
 

Re: outgoing call number identification

Postby vad » Tue Aug 21, 2007 4:44 am

TG NPD selector - you can find used NPD.
Translator/ Ext.numb plan /Numbering plan description - in NPD (used in TG) you can authorize "personal calling number use".
And last - in user parameters "Use personal calling number=true/false" and "Personal calling number" - you can manage personal number if Use personal calling number=true.
User avatar
vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
 
Posts: 2639
Joined: Thu Sep 23, 2004 3:47 am
Location: Russia

Re: outgoing call number identification

Postby kamel » Tue Aug 21, 2007 6:36 am

Thank you for respone.

I think I have another version of MGR app,
I can not find NPD in TrunkGroup
There is no Ext.numb plan in Translator category.

?
kamel
 

Re: outgoing call number identification

Postby cavagnaro » Tue Aug 21, 2007 1:33 pm

ON trunk Group is "Compatible with"
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC ACFE/ACSE R3.0/4.0/5.0/6.0
Genesys CIV 7.X & Developer
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
 
Posts: 5382
Joined: Wed Sep 14, 2005 4:45 pm
Location: Moved to Brasil

Re: outgoing call number identification

Postby knightr1der » Tue Aug 21, 2007 3:47 pm

Correction for Cavagnaro - "compatible with" is for logical discriminator under entity.

For Trunk Group NPD selector you must keep on descending hierachy under trunk group and you will see "Trunk Group NPD Selector" and within there, you will see which NPD has been assigned to the TG;

Code: Select all
TRUNK GROUP NPD SELECTOR
This object allows the TRUNK GROUP to select a NUMBERING PLAN DESCRIPTION (NPD) depending on the type of numbering plan (NPI/TON).

Management Mode
This attribute concerns the mgt mode of the Information Elements of byte 3 NPI and TON:

Automatic: manages automatically according to the trunk group type the corresponding elements between NPI/TON and the public/private NUMBERING PLAN DESCRIPTION:
In this mode therefore, none of the numbering plan description numbers is managed in this object.
Normal: normal mode is used to manage the NPI/TON for an outgoing call (Byte 3 calling and called):
Only the numbers of the public and private numbering plan description (NPD) are managed (see attributes public and private Numbering Plan Description (NPD) Nos. in this object).
The numbering plan description (NPD) numbers are managed automatically according to the NPI/TON received.
Expert: Same as normal mode. In addition, this mode is used to manage manually a specific NUMBERING PLAN DESCRIPTOR (NPD) according to the NPI/TON received:
The numbers of the public and private numbering plan description (NPD) are managed (see attributes public and private Numbering Plan Description (NPD) Nos. in this object).
The numbers of the numbering plan description (NPD) according to the NPI/TON received are managed (See all attributes num. plan. ID.....NPD No. in this object).
History repeats itself - because no one listens the first time!
-------------------
ACSE List
- Rel 9.x Corp
- IP Advanced
- CCD Expert
- OmniTouch CC Premium R8.x
User avatar
knightr1der
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
 
Posts: 1788
Joined: Fri Feb 16, 2007 5:07 pm
Location: Omnipresent

Re: outgoing call number identification

Postby cavagnaro » Tue Aug 21, 2007 8:25 pm

Hum i'll slap the guy who "teach" me that lol
sorry for the bad info, i better read all the manual and until that stay only with my Genesys and OTUC lol
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC ACFE/ACSE R3.0/4.0/5.0/6.0
Genesys CIV 7.X & Developer
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
 
Posts: 5382
Joined: Wed Sep 14, 2005 4:45 pm
Location: Moved to Brasil

Re: outgoing call number identification

Postby vad » Tue Aug 21, 2007 10:22 pm

If we say about mgr. "mgr -l GEA"
Go to translator - you will see "external numbering plan".
Go to trunk groups/ go down hierarchy - you will see "trunk group NPD selector".
Or your system release before 3.
User avatar
vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
 
Posts: 2639
Joined: Thu Sep 23, 2004 3:47 am
Location: Russia

Re: outgoing call number identification

Postby kamel » Wed Aug 22, 2007 12:17 am

It seem like I have an older release

this is menu under Translator category:
┌─Select an object───────────────┐
│ │
│ -> Prefix Plan │
│ Suffix Plan │
│ Numbering Plan │
│ Private Network Translator │
│ Public Network Translator │
│ Ext.Callback Translation │
│ Dialling Command Table │
│ DDI Translation │
│ Authoris.Code Table │
│ ARS Route list │
│ Node Access Prefix │
│ Network Access Prefix │
│ X25 Exc Numbering Plan │
│ Network Routing Table │
│ PIN (Personal Ident.No.) │
│ Private Call Profile │
│ X25 Transcoding │
│ │
└────────────────────────────────┘

and this under Trunk Groups -> Go Down Hierarchy:
┌─Trunk Group───────────────────────────┐
│ │
│ -> Go down hierarchy │
│ Consult/Modify │
│ Consult/Modify Overview of Object │
│ Modify │
│ Modify Overview of Object │
│ X25 synchronisation │
│ Facilities │
│ │
└───────────────────────────────────────┘

kamel
kamel
 

Re: outgoing call number identification

Postby vad » Wed Aug 22, 2007 1:33 am

Usually identification will be Installation number (from user Entity) + User number (from DDI translation).
Send or not caller Id - you can manage in user Entity or user can use "secret Id" prefix.
Prefix *78 and 0 - trunk group seizure or ARS? what type of your TG.
If you have ISDN connection - use "t3" command - you will see send or not your PBX calling number and so on.
User avatar
vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
 
Posts: 2639
Joined: Thu Sep 23, 2004 3:47 am
Location: Russia

Re: outgoing call number identification

Postby msanlimit » Thu Apr 28, 2011 1:11 am

if i turn on "use personal calling number" and try to call somewhere my call always going from my first number in group of numbers 556700 (group 556700-556900).How can i change it to number 556780?
msanlimit
Member
 
Posts: 1
Joined: Thu Apr 28, 2011 12:48 am


Return to Beginner's questions about the (4400 / Enterprise) PHONE APPLICATION or OPERATING SYSTEM

Who is online

Users browsing this forum: No registered users and 1 guest

Creative Commons License
AlcatelUnleashed by AlcatelUnleashed is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License.
Based on a work at www.AlcatelUnleashed.com.
AlcatelUnleashed is NOT affiliated with or endorsed by Alcatel-Lucent.
Contact: info at alcatelunleashed.com
RSS FEED