Alcatel Unleashed

Hello, thank you for the reply.
I tried but it is not possible.

Hi everyone. I am trying to make a network topology as follows https://www.alcatelunleashed.com/download/file.php?mode=view&id=4943 The idea is to try to get the ip's of vlan 2 and 4 to the other end through an epipe or vpls using qinq on the ports of the Nokia router that connects to the sw_cis...

Hi, thanks for your reply mivens.
I thought that might be the cause, but wanted to confirm with someone else.
I will have to use the Cisco router as ntp master then.

Regards.

Hi everyone. I have a topology of a router A connected to a router B with ospf running. I would like to leave router A as an ntp master server and leave router B as an ntp client, the idea is to add more clients for router A later on. I have the following configurations. In A: A:A>config>system>time...

Hello again Paramount. I did what you comment in the previous answer and it solved the problem of port blocking by stp. Before making the change of priorities the bridge-id were the same in both vpls and after giving priority to the router A interface, it changed its bridge-id and the sdp changed to...

If you can share this data with me I would appreciate it, it would be a great help, so I don't make a mistake.

Hi thanks for the reply.
I knew that command, but wanted to see if you could find out the exact model to buy a replacement power supply.
But I would understand from what you mention that components such as power supplies and fans are compatible between the 7210 SAS line models. right?

Hi thanks for the reply, I will try what you mention to see if I solve the problem of the first topology.
Anyway with the changes I made in the second configuration it was enough for what I needed.
I will comment once I make the STP priority changes.

Hello everyone.
My question is if there is a way to see what model of power supply a sas-m 7210 uses.
Thanks.

I add: now I have used the command "configure service vprn interface mac" to give a new mac to the interface of router B, but it didn't solve the ping problem either. The logs showed this. Router A 100 2017/07/20 00:32:59.21 UTC WARNING: STP #2026 Base 80-00-02-01-ff-00-00-00 "The Stp...