Alcatel Unleashed

Thank u for ur answers

Hello, I have a problem with a 6450-P24 switch with a METRO license. I need to replace this switch and assign a METRO license to another 6450-P48 switch. However, when I remove the METRO license from the malfunctioning switch and add it to the replacement switch, this error message appears: +++ Metr...

Hello,

My problem is that I don't see any log on my switch 2260 in console port. This is not the case when I connect to an Aos6 switch. Even by inserting the command "swlog console level info" or other, it does not change anything.

Thanks in advance for your help.

Sincerely
Zepeki

thx for ur help

Hello,

I would like to know if there is an equivalent of the AOS8 command ip service source-ip "int" snmp on AOS6 switches

Thank you in advance for your answer,

Thank you in advance for your answer, Sincerely,
Zepeki

I found the solution, it was simply necessary to let start the IP station with the PoE of the switch then to connect the usb C

thx for ur help

Zepeki

As far as I am concerned, it is the usb c connected to the docking station that generates the PoE .

Hello, I have a problem concerning the SSH connection on an Omniswitch 6350 since this switch is registered on the omnivista cirrus with auth & priv protocol. The switch is constantly receiving SSH connections from the Cirrus server which obviously do not succeed. This saturates the number of ma...

SADIM: However, the docking station is connected to the "PC" port of the IP8068s phone and as soon as the cable connected to the "PC" port is disconnected, the IP phone reboot and switch to the PoE Switch.

Gleylancer: I will see if the PoE can be disabled on the docking station

When I unplug the docking station, my IP phone turns off. So I would like to prioritize the PoE of the switch. I have to chain my phone with my PC because I only have one network socket.