Search found 6 matches
- 17 Dec 2020 10:07
- Forum: OmniSwitch 6450
- Topic: QoS issue
- Replies: 1
- Views: 1483
QoS issue
We are currently running only the most basic QoS-config possible: qos enable qos trust ports qos apply On a Stack of two OS6450-P48 and a OS6450-P24 running on 6.7.2.112.R03 i get the qos stats ( show qos queue ) not on all ports! Regardless if the port is up or not, on some ports i simply do not ge...
- 17 Dec 2020 10:01
- Forum: OmniSwitch 6560
- Topic: QoS Problems
- Replies: 1
- Views: 1504
QoS Problems
We are currently running only the most basic QoS-config possible: qos enable qos trust ports qos apply Additionally the qos-Stats are enabled so i can see what actually goes on there: qos qsi port x/1/y-z stats admin-state enable Now i have a OS6560-48X4 currently running on 8.6.289.R01 that doesn't...
- 25 Sep 2019 08:26
- Forum: OmniAccess WLAN Switching Systems (OEM)
- Topic: 4550 6.x -> 8.x and standalone->MM
- Replies: 1
- Views: 7892
Re: 4550 6.x -> 8.x and standalone->MM
Since nobody wanted/could answer - here are the answers i derived from the information i got: - does a version 8.x require the presence of a Mobility Master, or is it still capable of running in standalone-mode? YES - judging from the migration guide, the migration tool does not seem to provide the ...
- 09 Jul 2019 11:02
- Forum: OmniAccess WLAN Switching Systems (OEM)
- Topic: 4550 6.x -> 8.x and standalone->MM
- Replies: 1
- Views: 7892
4550 6.x -> 8.x and standalone->MM
I know, there's the migration tool for that purpose. However, i would like a different approach. Currently we have a single-controller environment featuring a 4550 controller, running on one of the latest 6.x versions. As additional information: we're running about 170 APs on it right now (constantl...
- 26 Jul 2018 08:28
- Forum: OmniAccess Wireless Access Points
- Topic: MeshPoint remains in State "Unprovisioned"
- Replies: 0
- Views: 4066
MeshPoint remains in State "Unprovisioned"
System: OAW-4550 Version: 6.4.4.18 (not possible to upgrade further yet because of some remainig old APs) I want to add a MeshPoint into en existing Ap Group. So i added a mesh config (Mesh Radio and Mesh Cluster), which basically has default values. Then i provisioned an existing AP (AP205) as Mesh...
- 16 Feb 2017 09:38
- Forum: OmniAccess Wireless Access Points
- Topic: AP-135 as a RAP: LAN-settings
- Replies: 1
- Views: 2384
AP-135 as a RAP: LAN-settings
Hello all, i want to use the AP-135 as a RAP for a small remote location. The RAP-config is not my problem - that is working. Now i would like to configure the second Ethernet-Interface as Gateway for some local network devices. Currently all devices are running with fixed IP-addresses - we have no ...