Search found 18 matches

by DoobieHowserMD
18 May 2017 13:16
Forum: 5620 SAM
Topic: We need a map bigger than 2000x2000 pixels
Replies: 2
Views: 3303

Re: We need a map bigger than 2000x2000 pixels

You cannot change the map size at this time. To "fit" more you need to utilize the group function to split the NE's into separate maps.
by DoobieHowserMD
18 May 2017 13:14
Forum: 5620 SAM
Topic: 7705 SAR-18 Router OS upgrade - do i need to upgrade SAM as well??
Replies: 1
Views: 2154

Re: 7705 SAR-18 Router OS upgrade - do i need to upgrade SAM as well??

For that big a jump in major releases you will most definitely need to upgrade your SAM to support the newer software release for the SAR. SAM 10 does not recognize SAR R8 software.
by DoobieHowserMD
18 May 2017 13:10
Forum: 7750 SR
Topic: how to rate-limit at the network IP interface egress
Replies: 2
Views: 1906

Re: how to rate-limit at the network IP interface egress

Based on this example: CE--->SAP--->Svc--->SDP--->Net Port--->P--->PE--->CE Are asking about rate limiting the traffic coming into the PE over a SAP? If so then you rate limit via the sap-ingress policy. SAP-egress controls traffic from the PE back out the SAP to the CE router. If you are trying to ...
by DoobieHowserMD
18 May 2017 12:58
Forum: 7705 SAR
Topic: SNMP V2 Setup Issue
Replies: 3
Views: 2106

Re: SNMP V2 Setup Issue

For SNMPv2 there are only a couple commands needed to make it work: configure system security snmp community <community-name> rwa version both configure system snmp no shutdown If you would like to send more data for each packet then you can change the mtu for snmp using configure system snmp packet...
by DoobieHowserMD
18 May 2017 12:52
Forum: 7705 SAR
Topic: GRE tunnel configuration
Replies: 6
Views: 6310

Re: GRE tunnel configuration

You do not need an ISA card to create a GRE tunnel for a SDP. Here is an example of configuring the SDP over GRE: configure service sdp <sdp-id> create far-end x.x.x.x/x no shutdown exit Then you will type in show service sdp and the list will show you the Delivery Method which will say GRE. The def...
by DoobieHowserMD
06 Sep 2013 15:36
Forum: 7750 SR
Topic: Extract the logs from the 7750SR
Replies: 1
Views: 7134

Re: Extract the logs from the 7750SR

Which logs? You looking to get log 99 or 100 or one you created yourself? If it one you created youraelf , then you will need to ftp or scp from the file command in whichever cf card it is on. You best bet is to run filezilla in server on your PC, then ftp from router to your PC, unless your router ...
by DoobieHowserMD
06 Sep 2013 15:27
Forum: 7705 SAR
Topic: ECMP over LDP
Replies: 1
Views: 1232

Re: ECMP over LDP

ECMP is a routing feature, not a MPLS feature. You can have multiple routes for OSPF or ISIS protection. But LDP won't ever use that. LDP is hop by hop MPLS, versus RSVP which uses an entire path from the beginning with protection features like secondary paths and/or FRR. LDP only cares about gettin...
by DoobieHowserMD
06 Sep 2013 15:23
Forum: 5620 SAM
Topic: persistentIndexFailure node 7750
Replies: 1
Views: 2390

Re: persistentIndexFailure node 7750

When the router boots, does it load a config at all? It sounds like your primary-image pointer. In the bof is set incorrectly, or you did not have persistence turned on during the upgrade. Persistence should always be on in the bof as that creates a security check file (.ndx file on cf3) that it run...
by DoobieHowserMD
22 Aug 2013 22:51
Forum: OmniVista 2500 v3.5
Topic: Background images are not seen in the topology view
Replies: 3
Views: 1904

Re: Background images are not seen in the topology view

I think the limitation is that it has to be bitmap (.BMP)...
by DoobieHowserMD
07 Aug 2013 21:30
Forum: GENERAL
Topic: Alcatel 7342 - Reset Password
Replies: 3
Views: 8433

Re: Alcatel 7342 - Reset Password

I sent this question on to some ALU support guys. Hopefully I will get an answer soon that I can pass on here...

Go to advanced search