Search found 262 matches

by mivens
18 Mar 2024 12:45
Forum: 7705 SAR
Topic: 7705 SAR-A Bricked?
Replies: 2
Views: 159

Re: 7705 SAR-A Bricked?

The important thing is the error "There is no Active IP address in the BOF file" You need to configure the IP address of the 7705 so that it can reach the FTP server. If the FTP server and the 7705 are not on the same subnet you will ned to configure a static-route as well. You shouldn't n...
by mivens
05 Feb 2024 08:10
Forum: 7750 SR
Topic: Configuration of master server ntp
Replies: 2
Views: 3832

Re: Configuration of master server ntp

Router B is rejecting router A. There is no stratum being sent by router A.

I believe you need to sync your router A to an NTP time source to make it work.
I do not think there is the equivalent of the Cisco commands "ntp primary" / "ntp orphan" in SR OS.
by mivens
04 Jun 2021 04:26
Forum: 7750 SR
Topic: SR7 cflowd compatibility with Solarwinds NTA
Replies: 6
Views: 4560

Re: SR7 cflowd compatibility with Solarwinds NTA

Probably never since IPFIX (version 10) is an IETF standard.
by mivens
04 Jun 2021 03:46
Forum: 7750 SR
Topic: SNMP on 7750 and missing OIDs for Network Discovery
Replies: 1
Views: 1173

Re: SNMP on 7750 and missing OIDs for Network Discovery

The equivalent of dot1dTpFdbTable is TIMETRA-SERV-MIB::tlsFdbInfoTable (.1.3.6.1.4.1.6527.3.1.2.4.2.4).
by mivens
12 Mar 2020 03:53
Forum: 7210 SAS
Topic: Secure SSH access to 7210 SAS-S
Replies: 1
Views: 5908

Re: Secure SSH access to 7210 SAS-S

Telnet server is disabled by default and SSH server is enabled. You can check with A:switch# show system information | match SSH Tel/Tel6/SSH/FTP Admin : Disabled/Disabled/Enabled/Disabled Tel/Tel6/SSH/FTP Oper : Down/Down/Up/Down and show system connections | match LISTEN Commands to enable/disable...
by mivens
26 Jul 2019 11:29
Forum: 7750 SR
Topic: symbol _ to as-path expression alcatel 7750
Replies: 1
Views: 2753

Re: symbol _ to as-path expression alcatel 7750

There are some extra spaces in your example but assuming you want to match an as-path where the first AS must be 77500 and then zero or 1 ASNs after that: as-path "FOO" expression "77500 .{0,1}" The regular expression syntax is documented here: https://infocenter.nokia.com/public...
by mivens
02 Jul 2019 04:27
Forum: 7750 SR
Topic: VPLS with SDP "up down"
Replies: 6
Views: 4798

Re: VPLS with SDP "up down"

Is the LDP session up?

Post the output of

show service sdp 22 detail
show router ldp session 3.3.3.3 detail
show log log-id 99 asc | match 3.3.3.3 context all
by mivens
17 May 2019 08:39
Forum: 7750 SR
Topic: iom3-xp-c throuput
Replies: 10
Views: 6452

Re: iom3-xp-c throuput

Yes you can do that but you need to be careful with your redundancy. Each SF/CPM-3 provides 50Gb/slot of switching capacity. 4x10Gbs x 3 across two cards means each IMM needs to support 60Gbps. So you need to have both SF/CPM-3 cards working. If one fails, you will be down to 50Gb/s of fabric capaci...
by mivens
17 May 2019 08:02
Forum: 7750 SR
Topic: iom3-xp-c throuput
Replies: 10
Views: 6452

Re: iom3-xp-c throuput

You can use that card with SF/CPM-3 and running R10.

You can think of an IMM as like an IOM where the MDAs are fixed so they can't be removed. IMMs still have virtual MDAs.
See this older thread with some pictures:http://www.alcatelunleashed.com/viewtop ... 89#p103804

Go to advanced search