Alcatel Unleashed

Found it, its in the list.

My next question is how do I change the keys when Im in a call - for example I want to enable a speed dial selection from the press of a button when Im in a particular call?

Thanks

Hi,

I cant remember how I configure\add to the speed dial from the management console - Im sure its possible?

Thanks

cavagnaro wrote:You mean Remote Gateways? Ask your ALU sales guy, he will offer you the solution

Thanks I was looking into the Alcatel 7515 Media Gateway which seems to have the solution I need.

Hi, We currently have the OmniPCX Office digital PBX and will potentially be looking to add additional remote offices. Is there a way to attach the remote offices to our current PBX by adding some form of breakout which will allow the addition of either IP phones or a smaller PBX which will connect ...

Hi,

Im talking about the front of the PBX, there are various LED indicators which obviously tell you there's either an error or something.

Hi, Our PBX had an issue a few weeks ago and it was the first time I noticed the front LED screen had turned red. It was due to the exchange but now the busy LED has also turned red. Does anyone have a link to a document or can anyone please tell me what each of the front LED indicators mean when re...

Thanks, the cable used is 100 pair. What I'll do is short out one end and get a multi meter on the other just to check that the cable is the correct pair and then wire into pin 4 and 5 and see what happens. We never really needed 100 pair at the most all we needed was 25 - I think that's why they wi...

Uses 2 as any other. The wiring map is up to you...depends on your MDF. Just remove it and do it from scratch if you are having so many issues. Thanks for the reply, so what your saying is its not specific to pin numbers? As long as both sides use the same numbers it fine and should work? As I read...

Hi guys, We have 2 cabs linked using 100 pair voice cable, the only problem is that when it was installed (some time ago) the engineer didn't test the lines and I guess just assumed they worked. Since then I have had to put some extensions into the second unit and it seems a bit hit and miss which l...

Bingo - thank you!