Hi Silvio, thanks for the info, we did that also , however after a deep search, we've detected another device in the network sending rip outdated information, now everything back to normal.
Regards
Hi everyone, we have a network with a router/firewall connected to one 6400 and two 6450, everything was working fine (inter-vlan routing, Ip-phones and SIP trunking with PABX = OK) until we have decided to make some changes (to optimize Ip ranges including new network-segments), now the intervlan r...
I think is the last version, I have the same. Specifically in my case I have enable the Sip_alg with incoming call working fine. Another clue in this issue is when i got the nat issues it doesn't affect at all the Sip_alg, the Sip_alg continue working fine I think I got a problem with mapping port b...
Hi When I was using the OA just for Voip SIP Inbound and outbound it was working fine but actually I have to change the configuration to enable internet data (web browser) for all the users. and I got this issue 2012 Jul 6 08:05:58: %NAT-2-LOG: IP Address/Ports used in DNAT matchlist is overlapping ...
Hi: From time to time I'm having this problem,and the router stop the NAT function. 2012 Jul 10 10:41:43: %SWE-4-NAT: not able to snat the packetcoming from src ip 10.51.1.94 on port: 52303 2012 Jul 10 10:41:44: %SWE-4-NAT: not able to snat the packetcoming from src ip 10.51.1.175 on port: 50038 201...
Hello Thanks for your answer with you I've confirmed what I was thinking
just one detail and it's about routing posibilities of the 6400
The 6400 could route between two Ip wit the range 200.113.193.78/28 and 10.51.1.4 /24 ??
As i always have seen routing with the subnetting schema
Thanks
Hi I know that is not the normal configuration for Vlan topics ,also for the ip subnetting and router functions but sometimes I have to deal with situations of configuracion out of the ordinary finding a solution getting to the limit the features of the devices) So I'm going with this one I'm workin...
thank you for the replay ,some details (I used to work with other devices an maybe the philosophy of ALU is different) 1- for the this case that Vlan 3 that is declare in both switches the ip interface in both has to be the same (10.53.3.1) could be a conflict??? 2- The port attached to this Vlan 3 ...
I have two 6400 brand new and I want to do RIP routing between them ,I want to do this configuration globally that you will see below I will create 2 VLAN per switch with its router interface Switch A Vlan 1- IP-10.51.1.0 Mask 255.255.255.0 Router Interface-10.51.1.1 Vlan 2 Ip-10.51.2.0 mask-255.255...