Alcatel Unleashed

I'm unfortunately to tell you that there isn't. The 4059 application can nog be controlled by a headset. When 4059 is activated the ipphone is only a audio device nothing more nothing less. Control is done in the 4059 application.

According to the systemdoc the max analog phones connected to 1 port is 3. Maybe 4 is a litle bit to much.

Found it. After some testing it also occurs to other users who forwarded their calls to the same pilot number.

In the end the pilot needs the option: Transfer to pilot in dissuasion set to true.

I've got 1 user who can not forward his calls to 1 particular pilot number. Since 3 weeks this doesn't work anymore. If I changed the number to a other number (station or pilot) then it works. If I use the same rule with the same pilot number by a different user it works. Only @ this particular user...

add country code in system / other system / signalling parameters

Use a network prefix. I think you have already: Sip trunk External Sip Gateway All you have to do is: put the nr of the external sip Gateway in a network routing number. Create a prefix with meaning network no. network number is your network routing number node /abcf trunk nr is your siptrunk nr. No...

Hi, As far as I know you can´t remove the plus. The Alcatel tries always to send cli in E164 international format when it is in Transit mode (from isdn to sip in this case) What you can do it to add your country code in system/other system parameters/Signalling String. If you live in the Netherlands...

I can confirm that the suggest from Eliott works. I had a site with a 2071 incident. After restarting the sipmotor the swap partition was free again.

Like windows also linux uses a swap partition. In this case it means that the the swap partition is already for 30% full. For this problem a reset of the oxe will help.

Use option nr 15. then fill in the phonenr of the concerned set and the number of seconds that telnet is on 1440 max I belief.