Search found 246 matches

by doublevand981
05 Nov 2019 23:36
Forum: System
Topic: DUAL CPU8 not show Local Main name in Main active CPU !
Replies: 7
Views: 3581

Re: DUAL CPU8 not show Local Main name in Main active CPU !

yep it shows Always the local name (1)pst_cpu20> Ethernet interface setup ======================== Netmask : 255.255.255.192 ============================================================================== | Machine type | Local interface | Name | Address | ===========================================...
by doublevand981
04 Nov 2019 01:57
Forum: System
Topic: DUAL CPU8 not show Local Main name in Main active CPU !
Replies: 7
Views: 3581

Re: DUAL CPU8 not show Local Main name in Main active CPU !

doublevand981 wrote: 04 Nov 2019 01:46
oldboy wrote: 04 Nov 2019 00:08 This is no issue at all, it will always show the name of the local CPU that is running in main mode.

if you do a ifconfig it will show the ip address of the main though
i connect to main role ip address (192.168.1.4). the CPU name show here should be cpu_m
by doublevand981
04 Nov 2019 01:46
Forum: System
Topic: DUAL CPU8 not show Local Main name in Main active CPU !
Replies: 7
Views: 3581

Re: DUAL CPU8 not show Local Main name in Main active CPU !

oldboy wrote: 04 Nov 2019 00:08 This is no issue at all, it will always show the name of the local CPU that is running in main mode.

if you do a ifconfig it will show the ip address of the main though
i connect to main role ip address (192.168.1.4). the CPU name show here should be cpu_m
by doublevand981
03 Nov 2019 22:12
Forum: System
Topic: DUAL CPU8 not show Local Main name in Main active CPU !
Replies: 7
Views: 3581

DUAL CPU8 not show Local Main name in Main active CPU !

Hi all, i having OXE system R12.3 running with Dual CPU-8. i configured for system working with Dual CPU active and test bascul command OK . But whenever i accessed the MAIN CPU, the command promt ONLY show the local name ( it not show Local MAIN name). and tried to test both CPUs as main role still...
by doublevand981
24 Oct 2019 21:39
Forum: MAIN
Topic: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)
Replies: 16
Views: 5990

Re: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)

Here it is. https://1drv.ms/b/s!AsNSTc6gtb8HgdR69utlcXCEpODbZw?e=jsSuOh Hi Alex, i facing problem related to IO2N card, It's may be failed and don't have replaced card. our system using just 200 extension now (ip phone, dect sets, analog, 40 ibs). Could i delete IO2N board in mgr and let Dual CPU r...
by doublevand981
13 Oct 2019 22:52
Forum: MAIN
Topic: CPU8 Blank after BIOS Setup
Replies: 9
Views: 3926

Re: CPU8 Blank after BIOS Setup

Hi all i want to share my story for you: I upgraded the CPU7 to CPU8 ----WITH OUT any additional cable. 1. i plugged CPU8 to slot 6 and 20 and Did NOT change any cables in backplane. Then just JUST got serial connection for CPU8 on slot 6 ONLY, and CPU8 on slot 20 could not get serial connetions 2. ...
by doublevand981
13 Oct 2019 22:34
Forum: MAIN
Topic: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)
Replies: 16
Views: 5990

Re: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)

alex wrote: 13 Oct 2019 04:12
doublevand981 wrote: 12 Oct 2019 19:50
what diffrent between N64 and IO2 signalling mode ?
It's all written in paragraph 14.3 of TC2414.
Could you share me the doc ??
by doublevand981
13 Oct 2019 22:28
Forum: MAIN
Topic: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)
Replies: 16
Views: 5990

Re: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)

Hi all I had changed the signaling as Alex guide then restart system . the Shelfs still could not up. After that i swap the cards from main shelf and remote shelf then it worked. But for some other remote shelfs i did the same procedure but it still down, even that i saw two INTOF2 cards can see eac...
by doublevand981
12 Oct 2019 19:50
Forum: MAIN
Topic: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)
Replies: 16
Views: 5990

Re: OXE Upgrade R6.2 (CPU7) to R12.2 (CPU8)

Just unplug all INTOFs. you can also unplug all boards in peripheral ACTs. Wait till all boards in the main ACT came into service. Then plug one INTOF and wait for one peripheral ACT to start, let them load in one-by-one. It could happen due to heavy load, Did you set your ACT 0 Shelf Address : 0 S...
by doublevand981
12 Oct 2019 11:13
Forum: Boards
Topic: New CPU8 - LAN / Serial Connection
Replies: 19
Views: 6905

Re: New CPU8 - LAN / Serial Connection

Hi all i want to share my story for you: I upgraded the CPU7 to CPU8 ----WITH OUT any additional cable. 1. i plugged CPU8 to slot 6 and 20 and Did NOT change any cables in backplane. Then just JUST got serial connection for CPU8 on slot 6 ONLY, and CPU8 on slot 20 could not get serial connetions. Be...

Go to advanced search